- KeepTruckin Login
KeepTruckin Login: How to Access Your Account After the Motive Rebrand
Your KeepTruckin account didn’t disappear — it just moved. Everything you need to log back in, understand what changed, and keep your fleet running without interruption.
- Independent Resource
- Not affiliated with Motive Technologies
- Official access at gomotive.com
motivelogin.com is an independent informational site and is not affiliated with gomotive.com. For official portal access, visit https://gomotive.com/
Introduction
If you typed keeptruckin login into your browser and ended up somewhere unfamiliar, you're not alone. Thousands of drivers, dispatchers, and fleet admins ran into the same situation when KeepTruckin rebranded to Motive. The platform didn't disappear. Your account didn't vanish. The login page just moved.
The short answer: go to gomotive.com and log in with the exact same email and password you used on KeepTruckin. Your account, your driver logs, your ELD configuration, and your compliance history transferred over automatically. Nothing was lost in the rebrand.
This guide covers the full picture: what changed, what didn’t, how to get back into your account, and what to do if your old credentials aren’t working. Whether you’re a driver trying to pull up a log, an owner-operator checking vehicle data, or a fleet admin managing a carrier account, the steps below apply to you.
This guide covers the full picture: what changed, what didn’t, how to get back into your account, and what to do if your old credentials aren’t working. Whether you’re a driver trying to pull up a log, an owner-operator checking vehicle data, or a fleet admin managing a carrier account, the steps below apply to you.
What Happened to KeepTruckin
KeepTruckin was one of the most widely used ELD platforms in the trucking industry, particularly among small and mid-size fleets. The company rebranded to Motive in 2022, a name change that reflected a broader shift in the platform’s scope beyond ELD compliance and into fleet management, safety, and telematics.
The rebrand was not a merger, acquisition, or product change. It was a rename. The same company, the same engineering team, and the same platform continued operating. The KeepTruckin name was retired, the keeptruckin.com domain was redirected, and gomotive.com became the official login and product URL.
The rebrand was not a merger, acquisition, or product change. It was a rename. The same company, the same engineering team, and the same platform continued operating. The KeepTruckin name was retired, the keeptruckin.com domain was redirected, and gomotive.com became the official login and product URL.
Why the Name Changed
KeepTruckin started as an ELD-focused company built around the FMCSA ELD mandate that took full effect in 2019. By 2022, the platform had grown to cover GPS tracking, dashcam integration, driver safety scoring, dispatch management, IFTA reporting, and AI-powered fleet analytics. The KeepTruckin name no longer reflected what the product actually did. Motive was chosen to represent that broader scope.
For drivers and fleet admins, the practical impact was minimal. The app icon changed. The website changed. The branding changed. The underlying product, the account data, and the ELD compliance features stayed intact.
When the Rebrand Happened
KeepTruckin announced the Motive rebrand in early 2022. The keeptruckin.com domain began redirecting to gomotive.com around the same time. Some users noticed the change immediately because the app icon updated on their phones. Others didn’t realize anything had changed until they searched for the Keep Truckin login page and got redirected somewhere new.
If you’ve been on the platform since the KeepTruckin days, motive formerly keeptruckin is the phrase you’ll see used across the industry to describe the same product under its new name.
Super admin accounts see all eight sections with full edit access. Fleet managers and dispatchers see a narrowed view based on the permissions assigned to their accounts. If a team member reports they can’t find a specific report or setting, the first thing to check is their role assignment, not the platform itself.
How to Log In After the Rebrand
The keeptruckin com login page no longer exists at its original URL. Visiting keeptruckin.com redirects you to gomotive.com. Your login credentials are the same. The page just looks different.
Step-by-Step: Logging In at gomotive.com
Open your browser and go to gomotive.com
If you had keeptruckin.com bookmarked, update that bookmark to gomotive.com.
Click "Log In" in the top right corner of the page
This takes you to the credential entry screen.
Enter your admin email address.
Use the same email address you registered with on KeepTruckin. If your account was created by a carrier admin, use the email from your original invite.
Enter your password.
The same password from your KeepTruckin account works here. No reset required unless you've forgotten it.
Complete two-factor authentication (2FA) if enabled.
The 2FA method you set up under KeepTruckin carried over. If you used SMS verification, the same phone number applies.
You're in
The dashboard or driver interface you land on depends on your account role.
What If the www.keeptruckin.com Login Redirect Isn't Working
Most browsers handle the keeptruckin.com redirect automatically. If you’re typing www.keeptruckin.com login into a browser and it’s not redirecting, try typing the full URL: gomotive.com. In some cases, older browser caches or bookmarks pointing to a deep keeptruckin.com URL (like keeptruckin.com/users/sign_in) may not redirect correctly. Clear your browser cache or manually type gomotive.com to get to the current login page.
Logging In Through the Mobile App
If you used the KeepTruckin app on iOS or Android, the app updated to the Motive Driver app automatically through the App Store or Google Play. Open the updated app and log in with your KeepTruckin credentials. The app icon changed from the KeepTruckin logo to the Motive logo, but the login process is identical.
If your phone didn’t automatically update the app, search for “Motive Driver” in your app store and install the current version. After installing, log in with your original KeepTruckin email and password.
If your phone didn’t automatically update the app, search for “Motive Driver” in your app store and install the current version. After installing, log in with your original KeepTruckin email and password.
What Stayed the Same and What Changed
This is the section most users actually need. The rebrand caused a lot of uncertainty about what would happen to existing data, ELD configurations, and compliance records. The short answer is: almost everything stayed the same.
What Transferred Automatically
| Feature | Status After Rebrand |
|---|---|
| Account credentials (email & password) | Carried over, no reset needed |
| Driver HOS logs and history | Fully preserved |
| ELD device assignments | Carried over |
| Vehicle and driver profiles | Fully preserved |
| HOS rule set configurations | Carried over |
| DVIR records | Fully preserved |
| Admin user roles and permissions | Carried over |
| Compliance reports | Accessible in the Motive dashboard |
| Billing and subscription details | Carried over |
| API integrations | Carried over (verify endpoints if using custom integrations) |
For fleet admins managing large carrier accounts, the most important thing to confirm post-rebrand is that driver HOS logs from the KeepTruckin period are still accessible in the Compliance section of the Motive dashboard. They are. Logs from before the rebrand sit alongside post-rebrand logs in the same interface.
What Changed Visibly
The most noticeable changes after the KeepTruckin to Motive transition were cosmetic and branding-related. The logo changed. The color scheme shifted. The app icon updated. Some navigation labels were reorganized as Motive added new features, which meant a few menu items moved.
One change that caught fleet admins off guard: the dashboard home screen layout shifted slightly. Some sections that were in the left navigation under KeepTruckin moved to different menu locations under Motive. If you can’t find a feature you used regularly, check the Admin section of the navigation panel first. Motive consolidated several configuration tools there.
One change that caught fleet admins off guard: the dashboard home screen layout shifted slightly. Some sections that were in the left navigation under KeepTruckin moved to different menu locations under Motive. If you can’t find a feature you used regularly, check the Admin section of the navigation panel first. Motive consolidated several configuration tools there.
New Features Added Under Motive Branding
After the rebrand, Motive continued adding features that weren’t part of the original KeepTruckin product set. These include expanded AI dashcam capabilities, driver coaching tools, more detailed safety scoring, and enhanced fleet analytics. These features vary by subscription plan. If you’re on a legacy KeepTruckin plan that predates the rebrand, some newer features may require a plan upgrade. Check your current plan details under Admin > Account Settings > Billing.
KeepTruckin ELD: What Happened to Your Device
The keeptruckin eld devices, specifically the original KeepTruckin ELD hardware, continued functioning after the rebrand without any required replacement. The device itself didn’t change. The firmware updates continued under the Motive name. If your KeepTruckin ELD device was working before the rebrand, it continued working afterward.
Is the KeepTruckin ELD Still FMCSA Compliant?
Yes. The physical KeepTruckin ELD device remained on the FMCSA’s registered ELD list after the rebrand. Motive updated the registration under its new company name. For roadside inspections, the device and the logs it generates meet ELD mandate requirements regardless of whether the branding on your dashboard says KeepTruckin or Motive.
If an officer asks about the device during a roadside inspection and the truck has older hardware with KeepTruckin branding on the physical device or cable, that’s not a compliance problem. The FMCSA registration covers the device regardless of the logo on the casing.
If an officer asks about the device during a roadside inspection and the truck has older hardware with KeepTruckin branding on the physical device or cable, that’s not a compliance problem. The FMCSA registration covers the device regardless of the logo on the casing.
Good news: No hardware replacement was required. Your existing KeepTruckin ELD devices continued operating and stayed FMCSA compliant under the Motive name.
Firmware Updates After the Rebrand
Motive continued pushing firmware updates to existing KeepTruckin ELD devices. These updates happen automatically when the device is connected to cellular service. You can confirm your device’s firmware version under Vehicles > [Vehicle Name] > Devices > Firmware Version in the Motive admin dashboard.
If your device shows an outdated firmware version and isn’t updating, power cycle it by turning the truck’s ignition off for 60 seconds and turning it back on. If the firmware still isn’t current after two or three ignition cycles over separate days, contact Motive support.
If your device shows an outdated firmware version and isn’t updating, power cycle it by turning the truck’s ignition off for 60 seconds and turning it back on. If the firmware still isn’t current after two or three ignition cycles over separate days, contact Motive support.
Motive Gateway vs. Original KeepTruckin ELD
Some fleets that joined under KeepTruckin still run the original ELD hardware. Newer Motive accounts typically use the Motive Gateway, which connects via OBD-II or J1939 and offers additional data streams compared to the older device. If your fleet is running a mix of legacy KeepTruckin ELD hardware and newer Motive Gateway units, both work within the same admin dashboard. Device type doesn’t affect the log format or compliance output.
KeepTruckin Admin Login: Accessing the Motive Admin Portal
For fleet administrators and motor carrier managers, the keeptruckin motive login for the admin portal follows the same credential transfer as the driver login. Your admin email and password work at gomotive.com without any changes.
Getting Back Into the Admin Dashboard
- Go to gomotive.com and click Log In. Navigate directly to the official URL in your browser.
- Enter your admin email address. This is the email that had super admin or fleet manager access under KeepTruckin.
- Enter your password Same password as before. No reset required unless you've forgotten it.
- Complete 2FA if enabled. Your 2FA method from KeepTruckin carried over automatically.
- You'll land on the Motive admin dashboard. The left navigation panel gives you access to Drivers, Vehicles, Compliance, Dispatch, Safety, Reporting, and Admin sections.
The admin dashboard layout shifted slightly from the KeepTruckin version. The core sections are all present, but some configuration tools moved. Admin > Users is where you manage driver and staff accounts. Compliance is where HOS logs, violation reports, and DVIR records live. Admin > Fleet is where vehicle groups and geofences are configured.
Differences in the Admin Panel Post-Rebrand
Safety Section Expanded
Motive added driver coaching, dashcam review tools, and safety event flagging as dedicated sections within the admin panel. Under KeepTruckin, some of these features were in different locations or didn't exist.
Reporting Got More Granular
The reporting section under Motive includes more filter options and export formats than the KeepTruckin version did at the time of the rebrand.
API Endpoints Updated
If your fleet integrated KeepTruckin data with a TMS or third-party logistics platform via API, check that your integration endpoints were updated to the Motive API. The KeepTruckin API endpoints were deprecated post-rebrand. Contact your TMS vendor or check gomotive.com developer documentation for current API details.
Super Admin Credentials Intact
Super admin accounts transferred with full permissions intact. If you were the super admin under KeepTruckin, your account carries the same access level in Motive. Verify all admin accounts still show the correct access level under Admin > Users.
Admin tip: If an admin account shows a reduced permission level after the rebrand, the super admin can correct it from Admin > Users > [User Name] > Edit Role.
Troubleshooting Login Problems After the Rebrand
Most post-rebrand login problems come down to a small set of issues. Work through these in order before contacting support.
Credentials Not Working at gomotive.com
If your email and password aren’t working on the Motive login page, the most common cause is a password that was changed or expired at some point during or after the rebrand transition. Use the Forgot Password link on the gomotive.com login screen. Enter your KeepTruckin email address and Motive will send a reset link to that inbox.
If you don’t receive the reset email within five minutes, check your spam folder. Emails from Motive’s notification system sometimes get filtered. If the email address on your account is no longer accessible (a former employer’s email, for example), contact Motive support at gomotive.com to go through identity verification and update the account email.
If you don’t receive the reset email within five minutes, check your spam folder. Emails from Motive’s notification system sometimes get filtered. If the email address on your account is no longer accessible (a former employer’s email, for example), contact Motive support at gomotive.com to go through identity verification and update the account email.
Two-Factor Authentication Issues After the Rebrand
2FA settings carried over from KeepTruckin. If you set up SMS-based 2FA on your KeepTruckin account and your phone number changed since then, the codes will go to a number you no longer have access to. Contact Motive support to reset your 2FA method. They’ll need to verify your identity before disabling it.
If you used an authenticator app for 2FA under KeepTruckin, the same codes continue to work in Motive. The underlying account didn’t change, so the authenticator app’s time-based codes are still valid.
If you used an authenticator app for 2FA under KeepTruckin, the same codes continue to work in Motive. The underlying account didn’t change, so the authenticator app’s time-based codes are still valid.
Account Shows as Locked or Deactivated
Some accounts were flagged for inactivity during the rebrand transition period. If your keeptruckin log in attempt returns an “account deactivated” or “account not found” error, the account may need reactivation. Contact Motive support directly. For carrier accounts, have your fleet admin check the account status under Admin > Users first. They can reactivate a deactivated driver or staff account without involving support.
App Still Showing KeepTruckin Branding
If your Motive Driver app still shows KeepTruckin branding, the app didn’t update automatically. Go to the App Store or Google Play, search for “Motive Driver,” and install the current version. Your login credentials work in the updated app. Log in after updating and all your data will be present.
For additional login help: Read our full guide on fixing Motive admin login errors on motivelogin.com for step-by-step troubleshooting on locked accounts, 2FA failures, and permission errors. For direct support, go to gomotive.com and use the live chat or phone support options listed on the support page.
Log In Now
Your KeepTruckin credentials work at the new Motive login page — no reset needed.
- faqs
Frequently Asked Questions
Is KeepTruckin now called Motive?
Yes. KeepTruckin rebranded to Motive in 2022. The company, the platform, the ELD devices, and the driver app are all now operating under the Motive name. The keeptruckin.com domain redirects to gomotive.com. The product itself didn’t change; only the name and branding did.
Where do I log in to my old KeepTruckin account?
Your old KeepTruckin account is now your Motive account. Go to gomotive.com and log in with the same email address and password you used on KeepTruckin. The keeptruckin com sign in page no longer exists as a separate URL. Visiting keeptruckin.com redirects you to gomotive.com automatically.
Did my data transfer when KeepTruckin became Motive?
Yes. All account data transferred automatically during the rebrand. Driver HOS logs, ELD configurations, vehicle and driver profiles, compliance records, DVIR history, and admin settings all carried over. You don’t need to re-enter any information or reconfigure your account.
What happened to the KeepTruckin ELD after the rebrand?
The KeepTruckin ELD hardware continued operating after the rebrand. Motive kept the device on the FMCSA’s registered ELD list under its new company name. Firmware updates continued to be pushed to existing devices. If your eld KeepTruckin was compliant before the rebrand, it remained compliant afterward. No replacement hardware was required.
What is the current URL for the motive KeepTruckin login page?
The current login URL is gomotive.com. The old keeptruckin.com and www.keeptruckin.com login URLs redirect there automatically. Update any saved bookmarks to gomotive.com to avoid relying on the redirect.
My KeepTruckin password stopped working after the rebrand. What do I do?
Go to gomotive.com, click “Log In,” and select “Forgot Password.” Enter the email address on your account and Motive will send a reset link. If you’ve also lost access to that email address, contact Motive support at gomotive.com with your account details to go through identity verification.
Can I still use the KeepTruckin app or do I need to download the Motive app?
The KeepTruckin app was rebranded to the Motive Driver app. If your phone updated the app automatically, you’re already running the current version under the Motive name. If the app still shows KeepTruckin branding, go to your app store and search for “Motive Driver” to install the updated version. Your existing login credentials work in the new app.
Does the keep truckin login work the same way for drivers and fleet admins?
Yes. Both drivers and fleet administrators use the same gomotive.com login page. Drivers log in through the Motive Driver app using the same credentials. Fleet admins log in at gomotive.com through the web browser to access the admin dashboard. The credentials are the same regardless of which interface you use.
Conclusion
The KeepTruckin to Motive rebrand was a name change, not a platform replacement. Your credentials work at gomotive.com exactly as they did at keeptruckin.com. Your driver logs, ELD configurations, compliance records, and account settings transferred automatically. The keeptruckin eld hardware you were already running continued to operate without any replacement required.
If you’re having trouble getting back in, the password reset flow at gomotive.com handles most login problems in under five minutes. For account-level issues or 2FA resets, Motive support at gomotive.com can resolve them directly.
For a full walkthrough of the admin dashboard you’ll find after logging in, read our Motive admin login guide on motivelogin.com. If you’re setting up ELD devices or configuring HOS rule sets for the first time under the Motive name, our Motive ELD setup guide covers the current configuration steps.
If you’re having trouble getting back in, the password reset flow at gomotive.com handles most login problems in under five minutes. For account-level issues or 2FA resets, Motive support at gomotive.com can resolve them directly.
For a full walkthrough of the admin dashboard you’ll find after logging in, read our Motive admin login guide on motivelogin.com. If you’re setting up ELD devices or configuring HOS rule sets for the first time under the Motive name, our Motive ELD setup guide covers the current configuration steps.